Learn more about Immo Bypass >

[electrF]

Model: Maccan
Motor capacity: 2.0
Diesel/Gasoline: gasoline
Production year: 2018
ECU type and number: 06K907425B
Memories of ECU: TC1791S
Description: Hello, I tried to calculate CS + PIN + MAC of Porsche Maccan but it was not possible to do it with toolbox .
Attached files of the automatic gearbox of the vehicle and attached files of the USED ECM, this ecu is not the original of the vehicle. The original ecu cannot be read.
I hope I can calculate the CS MAC PIN to be able to use Julie Litte.
I await your response.

[CarLabImmo]

Whats tool you used for ECU read ?

[CarLabImmo]

Sent ECU with Julie emulator to us and we will make all on the table.
Before contact with klaudia@carlabimmo.com about shipping details, please.

https://carlabimmo.com/support/contact

[electrF]

Hello, to read I use TRASDATA DIMSPORT, I cannot send to your country, I am in SOUTH AMERICA, it is very difficult to send and receive packages from abroad in my country. Can you help in another way?

[CarLabImmo]

We don't see key for ECU data read !!!
We recomend to read with FGtech Galetto or Magicmotosport tools.

https://www.magicmotorsport.com/flex/?g ... NtEALw_wcB

or

https://www.fgtechnology.eu/it/prodotti/

[electrF]

Hello, I was able to read the ecu with FLEX from Magicmotorsport, can you now calculate the data to put into the emulator? It was not possible to do it with the toolbox. I await your help, Thank you.

[CarLabImmo]

You will find the answer in the indicated folder in the Immo Bypass software.

To access the file:
1. Open Immo Bypass
2. Go to EMULATOR folder
3. Open the appropriate file (see attached photo)

Note: You don't need to have an active subscription to the program, just download the DEMO version.

You can download the ready file with the appropriate changes yourself from the Immo Bypass program.
See how to do it:

[electrF]

Hello, download your file and install LITE V115 emulator - unable to start the car, the blue light on the emulator flashes rapidly. Connect only positives, negatives and CAN network to the test bench, but it was not possible to make the blinking slow either. The blue light always flashes rapidly. Is it possible that your file for the emulator is wrong?
Also I did the bridges correctly as you suggest in the 2+4+5+7 emulator. You can help me?

[CarLabImmo]

Sent ECU with Julie emulator to us and we will test all on the table :
https://carlabimmo.com/support/contact

[electrF]

Hello, unfortunately I cannot send the ecu, I live in South America and customs procedures are really difficult. Can you help me from a distance?