CarLabImmo Cyber Monday Deals

Learn more about Immo Bypass >

Volvo 1.9 (2010) - Bosch EDC17CP22 0281015286 [IMMO OFF]

Roberto68
Posts:16
Joined:20 Sep 2018, 16:26

Postby Roberto68 »

Model: VOLVO
Motor capacity: 1984
Diesel/Gasoline: diesel
Production year: 2010
ECU type and number: EDC17CP22
Memories of ECU: TC1796
Description: Hello,

I got a replacement for my defective ECU. But I need Immo Off here.
Cloning the old one is not possible because the EEprom cannot be read completely or the file is damaged. Ori and "New" were read with KTAG. Maybe someone can repair the ori data.
Please help

Thanks a lot
Attachments
Volvo 1.9 (2010) - Bosch EDC17CP22 0281015286 [IMMO OFF]
IMG_20220624_184958.png (558.25KiB)Viewed 393 times
Volvo 1.9 (2010) - Bosch EDC17CP22 0281015286 [IMMO OFF]
IMG_20220624_184958.png (558.25KiB)Viewed 393 times
Volvo 1.9 (2010) - Bosch EDC17CP22 0281015286 [IMMO OFF]
IMG_20220624_184920.png (563.35KiB)Viewed 393 times
Volvo 1.9 (2010) - Bosch EDC17CP22 0281015286 [IMMO OFF]
IMG_20220618_124040.png (463.74KiB)Viewed 393 times

New_and_Old.zip

(7.44MiB)Downloaded 1 time

CarLabImmo
Administrator
Posts:24739
Joined:26 Nov 2012, 14:47

Postby CarLabImmo »

Use Support folder file from Immo Bypass software :
Attachments
Volvo 1.9 (2010) - Bosch EDC17CP22 0281015286 [IMMO OFF]
Support.png (275.92KiB)Viewed 371 times

Roberto68
Posts:16
Joined:20 Sep 2018, 16:26

Postby Roberto68 »

Unfortunately, the starter motor does not turn at all. No communication with the control unit.

CarLabImmo
Administrator
Posts:24739
Joined:26 Nov 2012, 14:47

Postby CarLabImmo »

Can you connect starter relay wires for starter crank ?

Roberto68
Posts:16
Joined:20 Sep 2018, 16:26

Postby Roberto68 »

If I short-circuit it (starter relay) as shown in the photo, the car will start. But it only runs for about 10 seconds and then stops. It also does not accelerate. If I want to start it via the start button, it shows "relearn immobiliser" and does nothing.
Attachments
Volvo 1.9 (2010) - Bosch EDC17CP22 0281015286 [IMMO OFF]
IMG_20220707_172953.jpg (476.96KiB)Viewed 310 times

CarLabImmo
Administrator
Posts:24739
Joined:26 Nov 2012, 14:47

Postby CarLabImmo »

Can you try to coding injections and diesel pump with any Volvo tool ?

With orginal MPC car start and stop or don't start any moment ?

Roberto68
Posts:16
Joined:20 Sep 2018, 16:26

Postby Roberto68 »

I'm trying to code it.
I bought the car like this. I don't have 100% original data because someone has already played around with it. Since the beginning does not start and also not cranking

CarLabImmo
Administrator
Posts:24739
Joined:26 Nov 2012, 14:47

Postby CarLabImmo »

Can you write to second hand ECU eeprom from orginal ECU andf check car will start ?

Roberto68
Posts:16
Joined:20 Sep 2018, 16:26

Postby Roberto68 »

no connection to engine control unit :-(

Roberto68
Posts:16
Joined:20 Sep 2018, 16:26

Postby Roberto68 »

"Can you write to second hand ECU eeprom from orginal ECU andf check car will start ?"

No, Start, no Crank, same as the Ori