CarLabImmo Forum - IMMO OFF

Model: W202
Motor capacity: 2.2
Diesel/Gasoline: diesel
Production year: 1996
ECU type and number: Lucas ED0012
Memories of ECU: -
Description: Hi! Trying to put a clixe mercedes1 emulator for a lucas ED0012 i get in trouble. Manual say that the small connector of immo box has 2 pins but only one wire connected and mine have two wires. Emulator can be used also or it will not work?

Ecu lucas ED0012 - R04010009A
Immo box siemens 5WK4572

Thanks!

Do you have inginition coil on inginition or green and red leds on glass mirror ?

https://carlabimmo.com/manuals/immobili ... edes-1.pdf

I have green and red leds, but my immo module has 2 wires on the small connector, not only one as it say the manual

Connect CR emulator to ECU.
Disconnect plug from WSP and check car start ?

WSP? You mean immo module?

Both two plugs or only the 2 pin one?

WSP is immo module.
Disconnect two plugs and check car will start ?

Connected emulator, cutted code wire (13) and immo box removed.

Car doesn’t start

Also tried to connect ecu to diag on bench for take a look at immo status without success. On the ecu pinout shown in the manual, the diagnostics pin it’s k-line? Do you have the schematic for can version?

Ecu is alive because i have current consumption on bench and on car i have the check engine light when i put ignition.

Any advice?

You should a connect as our manual.
Kline is isin't as immo line.